|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
P6KA6.8 THRU P6KA43A AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR Breakdown Voltage - 6.8 to 43 Volts D * Peak Pulse Power - 600 Watts FEATURES P A T E N T E DO-204AC 0.034 (0.86) 1.0 (25.4) MIN. 0.028 (0.71) DIA. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. Designed for under the hood applications Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Exclusive patented PARTM oxide passivated chip construction 600W peak pulse power surge capability with a 10/1000s waveform repetition rate (duty cycle): 0.01% Excellent clamping capability Low incremental surge resistance Fast response time: typically less than 1.0ps from 0 Volts to V(BR) For devices with V(BR)10V, ID are typically less than1.0A High temperature soldering guaranteed: 300C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension MECHANICAL DATA Case: JEDEC DO-204AC molded plastic body over passivated junction Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) Mounting Position: Any Weight: 0.015 ounce, 0.4 gram Dimensions in inches and (millimeters) Patent #'s 4,980,315 5,166,769 5,278,094 * Available in uni-directional only MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. SYMBOL VALUE UNITS Peak pulse power dissipation with a 10/1000s (NOTE 1, FIG. 1) PPPM IPPM PM(AV) Minimum 600 SEE TABLE 1 Watts Amps Watts Pulse pulse current with a 10/1000s waveform (NOTE 1, FIG. 3) Steady state power dissipation at TL=75C lead lengths 0.375" (9.5mm) (NOTE 2) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (NOTE 3) Maximum instantaneous forward voltage at 50A (NOTE 3) Operating junction and storage temperature range 5.0 IFSM VF TJ, TSTG 70.0 3.5 -65 to +185 Amps Volts C NOTES: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25C per Fig. 2 (2) Mounted on copper pad area of 1.6 x 1.6" (40 x 40mm) per Fig. 5 (3) Measured on 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum 1/21/99 ELECTRICAL CHARACTERISTICS RATINGS at (TA=25C unless otherwise noted) TABLE 1 Breakdown Voltage V(BR) (Volts) (NOTE 1) Device Type MIN MAX Maximum Reverse Leakage at VWM ID (A) Maximum Reverse Leakage at VWM TJ=150C ID (A) Peak Pulse Current IPPM (NOTE 2) Test Current at IT (Amps) Stand-off Voltage VWM (Volts) (Amps) Maximum Clamping Voltage at lPPM VC (Volts) Maximum Temperature Coefficient of V(BR) (% / C) P6KA6.8 P6KA6.8A P6KA7.5 P6KA7.5A P6KA8.2 P6KA8.2A P6KA9.1 P6KA9.1A P6KA10 P6KA10A P6KA11 P6KA11A P6KA12 P6KA12A P6KA13 P6KA13A P6KA15 P6KA15A P6KA16 P6KA16A P6KA18 P6KA18A 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.3 15.8 17.6 16.8 19.8 18.9 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 500 500 250 250 100 100 25.0 25.0 10.0 10.0 5.0 5.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1000 1000 500 500 200 200 100 100 50 50 20.0 20.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 55.6 57.1 51.3 53.1 48.0 49.6 43.5 44.8 40.0 41.4 37.0 38.5 34.7 35.9 31.6 33.0 27.3 28.3 25.5 26.7 22.6 23.8 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.076 0.076 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 ELECTRICAL CHARACTERISTIC RATINGS (TA = 25C unless otherwise noted) TABLE 1 (Cont'd) Breakdown Voltage V(BR) Volts (NOTE 1) Device Type MIN MAX Maximum Reverse Leakage at VWM ID (A) Tc=150C Maximum Reverse Leakage at VWM ID (A) Peak Pulse Current IPPM (NOTE 2) Test Current at IT (mA) Stand-off Voltage Vwm (Volts) (Amps) Maximum Clamping Voltage at lPPM VC (Volts) Maximum Temperature Coefficient of V(BR) (% / C) P6KA20 P6KA20A P6KA22 P6KA22A P6KA24 P6KA24A P6KA27 P6KA27A P6KA30 P6KA30A P6KA33 P6KA33A P6KA36 P6KA36A P6KA39 P6KA39A P6KA43 P6KA43A 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 2.0 2,0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 20.6 21.7 18.8 19.6 17.3 18.1 15.3 16.0 13.8 14.5 12.6 13.1 11.5 12.0 10.6 11.1 9.7 10.1 29.1 27.7 31.9 30.6 34.7 33.6 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 NOTES: (1) V(BR) measured after IT applied for 300s. IT=square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 RATINGS AND CHARACTERISTIC CURVES P6KA6.8 THRU P6KA43A FIG. 1 - PEAK PULSE POWER RATING CURVE FIG. 2 - PULSE DERATING CURVE 100 PPPM, PEAK PULSE POWER, kW NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA=25C 100 PEAK PULSE POWER (PPP) or CURRENT (IPP) DERATING IN PERCENTAGE, % 10 75 50 1.0 25 0.1 0.1s 1.0s 10s 100s 1.0ms 10ms td, PULSE WIDTH, sec. 0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE, C FIG. 4 - TYPICAL JUNCTION CAPACITANCE FIG. 3 - PULSE WAVEFORM 150 IPPM, PEAK PULSE CURRENT, % tr=10sec. PEAK VALUE IPPM PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPP 6,000 TJ=25C f=1 MHz Vsig=50mVp-p CJ, JUNCTION CAPACITANCE, pF 100 1,000 MEASURED at ZERO BIAS HALF VALUE - IPP 2 50 10/1000s. WAVEFORM as DEFINED by R.E.A. 100 80 MEASURED at STAND-OFF VOLTAGE, VWM td 0 0 1.0 2.0 t, TIME, ms 3.0 4.0 10 1.0 10 100 200 V(BR), BREAKDOWN VOLTAGE, VOLTS FIG. 5 - STEADY STATE POWER DERATING CURVE PM(AV), STEADY STATE POWER DISSIPATION, WATTS 5.0 L 3.75 IFSM, PEAK FORWARD SURGE CURRENT, AMPERES = 0.375"(9.5mm) LEAD LENGTHS 60 HZ RESISTIVE OR INDUCTIVE LOAD FIG. 6 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 200 TL=75C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 2.5 1.6 x 1.6 x 0.040" (40 x 40 x 1mm) COPPER HEAT SINKS 100 1.25 0 0 25 50 75 100 125 150 175 200 TL, LEAD TEMPERATURE,C 10 1 10 NUMBER OF CYCLES AT 60 HZ 100 |
Price & Availability of P6KA30A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |